There are a lot of fun things people can do when at home, particularly easy craft. This includes making good things out of junk. Below are some steps on how to make paper beads out of junk materials. Tools needed include glue, scissors, pencil or pen, varnish, ruler, string, an assortment of papers, paper plate, and dowel or toothpick
Firstly, tear a paper from the magazine or newspaper. Cut it into strips beginning from top to bottom using a paper cutter or scissors. Triangular shapes are more appropriate. A template can give you guidance on how to cut the strips. The bead width should be the base of the triangle.
Second, place your dowel at the base of the triangle and roll it round itself, starting with the broadest end, until the glued point is wrapped around the dowel. Roll the strip evenly if you want to achieve proportion so that the pointed end is at the center. Use your finger to extend the glue on the bead. This ensures it is more stud, shiny and held together.
The third step is to stick the rolled piece to the tip of the triangle and ensure it stays tightly rolled. Before rolling the bead on your finger, make sure the end of the piece is stuck down, used light pressure to ensure that it is cylindrical and protected. If it does not stick tightly, apply another glue and hold the bead for a while to let the glue set.
The next step is to apply varnish to the bead on dry the glue. This makes it water resistant. It is prudent to swivel them around the cocktail stick so as to prevent them from sticking when completely dry. Ensure the glue dries completely and ensure it does not attach to something else. A toothpick stuck into a pincushion or some foam can also be used to shove the excess glue. A longer-lasting and glossier finish can be achieved by adding several coats.
You can then remove the beads after a few hours. This is when your varnish has positioned on your bead. It can also be done by sliding the items out of a bamboo skewer or dowel. It will hold only if it is glued and wrapped fine. If you experience unraveling of the bead, add more glue.
The other step is to ensure you wipe out traces of glue before you start making another bead to prevent it from sticking out. After completion of the above steps, you are now in a position to create long strings and use them to make bracelets, necklaces, earrings, and home decors. Decorate your beads by adding glitter and paint on them.
Though this project might be flimsy, the outcome is dependent on the glue and glaze you use. A number of items can be made out of this task including bracelets, necklaces, rings, and earrings. Home decors can also be made out of this. Before stacking your old papers into the bin, consider making something great out of them.
Firstly, tear a paper from the magazine or newspaper. Cut it into strips beginning from top to bottom using a paper cutter or scissors. Triangular shapes are more appropriate. A template can give you guidance on how to cut the strips. The bead width should be the base of the triangle.
Second, place your dowel at the base of the triangle and roll it round itself, starting with the broadest end, until the glued point is wrapped around the dowel. Roll the strip evenly if you want to achieve proportion so that the pointed end is at the center. Use your finger to extend the glue on the bead. This ensures it is more stud, shiny and held together.
The third step is to stick the rolled piece to the tip of the triangle and ensure it stays tightly rolled. Before rolling the bead on your finger, make sure the end of the piece is stuck down, used light pressure to ensure that it is cylindrical and protected. If it does not stick tightly, apply another glue and hold the bead for a while to let the glue set.
The next step is to apply varnish to the bead on dry the glue. This makes it water resistant. It is prudent to swivel them around the cocktail stick so as to prevent them from sticking when completely dry. Ensure the glue dries completely and ensure it does not attach to something else. A toothpick stuck into a pincushion or some foam can also be used to shove the excess glue. A longer-lasting and glossier finish can be achieved by adding several coats.
You can then remove the beads after a few hours. This is when your varnish has positioned on your bead. It can also be done by sliding the items out of a bamboo skewer or dowel. It will hold only if it is glued and wrapped fine. If you experience unraveling of the bead, add more glue.
The other step is to ensure you wipe out traces of glue before you start making another bead to prevent it from sticking out. After completion of the above steps, you are now in a position to create long strings and use them to make bracelets, necklaces, earrings, and home decors. Decorate your beads by adding glitter and paint on them.
Though this project might be flimsy, the outcome is dependent on the glue and glaze you use. A number of items can be made out of this task including bracelets, necklaces, rings, and earrings. Home decors can also be made out of this. Before stacking your old papers into the bin, consider making something great out of them.
About the Author:
Learn how to make paper beads by following the instructions we have provided online. The website that reveals the tips can be found at http://www.paperbeadgirl.com.
ليست هناك تعليقات:
إرسال تعليق